KATSU Tools 481507 7L Manual Vacuum Fluid and Oil Extractor Suction Hand Pump Car Engine

by KATSU Tools

KATSU Tools 481507 7L Manual Vacuum Fluid and Oil Extractor Suction Hand Pump Car Engine

Add to Cart »

Key Features- 7L capacity device constructed from composite materials- Suitable for the extraction of all types of engine, Transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery- Suitable for low viscosity fluids such as water- Suitable for draining items such as fish-tanks, basins, baths, cisterns, sinks etc- Provided with 3 different probes, please, see descriptionAdditional information- Capacity: 7L- Suction port: 26mm- Suction probes: ø4, ø6, ø10, and 1Pc of ø4 brass probe length 1M- Main material: ABS with aluminium inflator

Costumer review about KATSU Tools 481507 7L Manual Vacuum Fluid and Oil Extractor Suction Hand Pump Car Engine

Extracted 6 litres of old engine oil out of 2010 BMW 1 Series 116td N47 in under 15 mins with the largest of the three interchangeable tubes that came with the pump.Prior to oil change the sump on the BMW was slightly overfilled and complete oil change was needed; the pump sucked all the oil out of the sump via the dipstick hole. The car took bang on 5 litres of new oil which measured just under the max mark on the dip stick ( manual said this make of BMW takes 5.5 litres ) so proves all oil was removed.The pump has spout and this meant old oil was easily transferred to old oil containers for eventual recycle.I got cars engine warmed up to max operating temp before the oil change - not a problem for the pump which is also great value for money and means no getting under cars with filters that can be accessed from the top of the engine.